Milling
Check cutting speed, cutter diameter, flute count and nominal chip load.
Open WorkspaceChoose the machining operation you need to check. Milling uses feed per tooth; drilling and turning commonly use feed per revolution. Each workspace connects its calculation with the source units and setup questions for that operation.
Drilling
Connect drill RPM and programmed feed with feed per revolution.
Open WorkspaceTurning
Use workpiece diameter to relate RPM, surface speed and turning feed.
Open WorkspaceTapping
Convert thread pitch and RPM into synchronized feed.
Open WorkspaceReaming
Check rotational speed and feed while keeping hole preparation separate.
Open WorkspaceTrade Workspace Questions
Where Are The Different Milling And Lathe Variations?
The milling workspace covers end mill and milling feed workflows. The turning workspace covers conventional lathe speed, feed per revolution and changing diameter. Related variations stay within those operation pages.
Does The Drilling Workspace Use A Milling Feed Equation?
No. It explains linear feed as RPM multiplied by source feed per revolution. The embedded second panel reverses that relationship to check a known linear feed.
Help Improve This Resource
Request A Tool
Describe the calculation your workflow needs, the inputs you already have and the output you want to check. Include units and an example without confidential job details.
Request A ToolReport An Error
Share this page address, the entered values and the result you expected. Include the source of your comparison so the formula, units and explanation can be investigated.
Report An ErrorCNC Feeds & Speeds Editorial Desk
The site brings calculation tools and machining references into one workspace. Use the editorial and site information to understand its purpose and limitations. Send corrections with a reproducible example through the error report form.
Related Articles
Continue with the calculation, setup or troubleshooting question closest to your task.
Record A CNC Setup So The Next Job Starts With Evidence
Preserve source data, calculated commands and observed results separately. Use local setup records with clear revisions, units and export limits.
Read Article
Metric Tool, Imperial Feed: Avoid Mixed-Unit Errors
Check length, feed, surface speed, volume and pitch conversions. Follow equivalent metric and imperial examples before transferring a command.
Read Article
Cutting Time, CAM Time And Quoted Cycle Time
Define the scope behind each time figure. Separate feed travel, machine events, observations and production work before using an estimate.
Read Article
How to Read Feed and Speed Charts Without Misusing Them
A practical method for interpreting CNC cutting-data charts, matching units, and cross-checking chart values with transparent calculations.
Read Article
RPM vs Feed Rate: What Changes When Spindle Speed Changes?
Understand how spindle RPM and programmed feed interact, when feed should scale, and why machine limits change the calculation.
Read Article
What Is SFM in CNC Machining?
Learn what surface feet per minute means, how it relates to RPM and diameter, and when to use SFM versus metric cutting speed.
Read Article
Peck Drilling Time: Count The Travel Between Cuts
Separate new cutting travel, re-entry, retracts and dwell. Build a transparent time estimate that respects the actual cycle and controller.
Read Article
How to Calculate CNC Feed Rate
A practical guide to calculating CNC milling feed rate from spindle speed, flute count and chip load, with unit checks and verification steps.
Read Article
Chip Load Explained: Feed per Tooth in CNC Machining
Understand feed per tooth, how chip load is calculated, and how flute count and spindle speed change milling feed.
Read Article
CNC Material Removal Rate Explained
Calculate and interpret material removal rate for CNC milling, including feed, radial engagement and axial depth.
Read Article
Feeds and Speeds for Aluminum: How to Build a Starting Point
Build an aluminum milling starting point from toolmaker cutting speed and chip load, then verify engagement, chip evacuation and machine limits.
Read Article
Feeds and Speeds for Stainless Steel: A Practical Framework
A calculation-first framework for stainless steel machining that emphasizes tool data, chip thickness, rigidity and heat control.
Read Article